Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| |||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
Thanks Nope, no kit that I know of. If you have a trained Prowler Tech, they probably have the special tools required to maintain your Prowler. If you perform your own maintenance, you should purchase a maintenance manual which will tell you when any special tools are needed. Welcome and hope the picture means you're driving a Mulholland. ------------------ Here is a description of the contents: Miller Special ToolsBuckaneer I just took delivery of my 2001 prowler from the dealer 2 months ago. I see several members talking about the Prowler Tool kit. Does it come with one and if so where is it kept? JoeD Buck,
I think you've seen posts about what tools the guys keep handy. Do a search on "tool kit" - might cime up with something.
Congrats on your Kat!TriJim Pirate -- The tool kit is stored with the spare tire. Just kidding.
Jim B.
'01 Mulholland Prowler
'02 Final Edition Viper #264
www.FEViper.com CJ There is actually a Prowler tool kit that the dealers could buy. If I remember correctly, they've been selling for around $600.000
Prowler Essential Tool Kit
Number: 6999
Includes the following tools:
6998 Remover - This tool is used to remove the ball joint studs from the front steering knuckle
8106 Adpater, Torque Wrench - Use this torque wrench adapter to adjust the front upper control arem cam on Prowler Vehicles
8182 rRmover - This special tool is used to remove the parking brake cable from the console flange during servicing procedures on the new Prowler.
8182 Remover - This special tool is used to remove the parking brake cable from console flange during servicing procedures on the Prowler.
8183 Remover - Use this new tool to remove the rear lower control arm ball joint stud from the knuckle
8185 Adapters, Power Steering - Thse special adapters asre used with the 6815 Power Steering Analyzer to connect at the steering gear for diagnostics.
8187 Adapter - This new adapter is used with the C-4007-A Brake Gauge set to connect at the proporiioning valve for pressure diagnostics
8190 Remover/Installer - This tool is used to service supsnsion bushings on the Prowler
8191 Holder, Sprocket - Use this tool to hold the crankshaft sprocket on 3.5L engines in the Prowler during serviing procedures
8192 Magnet - This speically designed magnet is used with the DRBIII to reset the sending unit for tire pressure gauges on Prowler wheels.
8193 Disconnect Tool - This special tool is used to disconnect the 3/8" transaxle cooling lines in Prowler vehiclesBuckaneer Thanks to everyone for the info on the tool kit. This is the best place to go to get good prowler information. Seems like I have to stop in here at least 3 times a day to see what is going on!!!! Prowler Only 3 times? That'll change. Todd Cameron only 3 times? that's like saying your going to keep it "stock" FL Blue Kat What's wrong with all stock?
All material contained herein, Copyright 2000 - 2020